(18x9.5" ET41 SM-10RS in Motorsport Gold W/ 265/35-18 Falken Azensis RT660 tires)
Models Covered in This Guide
2016-2022 Audi TT RS (FV/8S)
The third and final generation Audi TT RS initially made its debut in 2016 with a drivetrain that was mostly unchanged from the previous generation. The FV/8S TT RS features the same 2.5 liter turbocharged inline 5 cylinder engine as the 8J TT RS, however, the output was increased significantly to 395 hp and 354 lb-ft of torque. Due to the jump in horsepower and torque, Audi removed the 6-speed manual as an option for the FV/8S TT RS, making the 7-speed dual clutch the only transmission available. While this move upset some of the traditional Audi "purists", there is no arguing the fact that the final generation TT RS offers significantly more performance over the outgoing model.
Much like the 8J TT RS, with the right modifications the FV/8S TT RS can be incredibly quick and competent both on the street and at the track. Taking into consideration the Quattro AWD system and front-biased weight distribution of the TT RS, a rotatable square setup is a must to ensure a neutral handling balance and even tire wear at all four corners. Shedding unsprung weight by downsizing to an 18" wheel will also improve upon the overall handling, braking, and acceleration characteristics of the car.
Our 18x9" ET42 Flow Formed SM-10 compliments the Audi TT RS perfectly for both street and light HPDE use, while our 18x9.5" ET41 Forged SM-10RS is the best fit for enthusiasts wanting a dedicated track setup without any compromises. With a 5x112 bolt pattern and a 57.1mm center bore, our VW/Audi-specific SM-10 and SM-10RS provides a complete bolt-on fitment without the need for centering rings, spacers, or hub adapters. Designed with brake clearance as a priority, both the 18x9" ET42 SM-10 and 18x9.5" ET41 SM-10RS can clear the massive factory steel and carbon ceramic 8-piston 370mm front brakes with room to spare.
|
Bolt Pattern |
Center Bore |
Lug Seat |
Thread Pitch M14x1.5mm |
Available Finishes
SM-10 Flow Formed
SM-10RS Forged
OEM+: The Perfect Plug and Play Street Fitment For Your Audi TT RS
(18x9" ET42 SM-10s in Anthracite W/ 255/35-18 Michelin PS4S tires)
These fitments are ready-to-bolt-on, typically without any modifications, and provide a meaningful increase in wheel width over stock. The 18" fitments listed in this section are an ideal choice for the enthusiast who regularly drives their Audi on the street but still wants to participate in a few HPDE's as well. These fitments are a great match for a completely stock or lightly modified TT RS. With a focus on brake clearance, our 18" fitments are able to clear the standard 8-piston 370mm factory TT RS brakes with ease, as well as a variety of aftermarket BBK's.
Front & Rear: 18x9” ET42 with 255/35-18 tires
- Available in Flow Formed SM-10 design only.
- Direct fit
- 265/35-18 tires can also be used but may require some additional negative camber when using more aggressive compounds.
- No additional wheel hardware is required (centering rings, hub adapters, spacers).
APEX Staff tire recommendations:
- All-Season: Michelin Pilot Sport AS4: 255/35-18, 265/35-18
- Performance Summer: Michelin Pilot Sport 4S: 255/35-18, 265/35-18
- Extreme Performance Summer: Bridgestone Potenza RE-71R: 255/35-18, 265/35-18 Hankook RS-4: 265/35-18 Falken Azenis RT660: 265/35-18
- R-Compound: Nitto NT01: 255/35-18, Michelin Pilot Sport Cup 2: 255/35-18, 265/35-18 Toyo Proxes R888R: 255/35-18, 265/35-18
(18x9" ET42 SM-10s in Anthracite W/ 255/35-18 Michelin PS4S tires)
Performance Street & Track: The Perfect Fitment For Your HPDE-Focused TT RS
(18x9.5" ET41 SM-10RS in Motorsport Gold W/ 265/35-18 Falken Azensis RT660 tires)
These fitments are the perfect match for weekend track warriors and hardcore racers seeking to maximize the wheel and tire size that they can fit on their Audi TT RS. These aggressive wheel specs will occasionally require supportive modifications commonly found on track cars, such as increased negative camber. While certain configurations can provide a complete direct fit on a stock car, additional modifications may be required for a rub-free fitment depending on your suspension setup and specific tire selection. With a focus on brake clearance, our 18" fitments are able to clear the standard 8-piston 370mm factory TT RS brakes with ease, as well as a variety of aftermarket BBK's.
Front & Rear: 18x9.5” ET41 with 265/35-18 tires
- Available in Forged SM-10RS design only.
- Additional front and/or rear negative camber may be required when using more aggressive tire compounds.
- No additional wheel hardware is required (centering rings, hub adapters, spacers).
APEX Staff tire recommendations:
- All-Season: Michelin Pilot Sport AS4: 265/35-18
- Performance Summer: Michelin Pilot Sport 4S: 265/35-18
- Extreme Performance Summer: Bridgestone Potenza RE-71R: 265/35-18 Hankook RS-4: 265/35-18 Falken Azenis RT660: 265/35-18
- R-Compound: Michelin Pilot Sport Cup 2: 265/35-18 Toyo Proxes R888R: 265/35-18
(18x9.5" ET41 SM-10RS in Motorsport Gold W/ 265/35-18 Falken Azensis RT660 tires)
(18x9" ET42 SM-10s in Anthracite W/ 255/35-18 Michelin PS4S tires)
Still have questions?
Fill out our Fitment Recommendation form
Call us: 925-245-0773
Email us: support@apexraceparts.com